sin resumen de edición
Sin resumen de edición |
|||
| Línea 779: | Línea 779: | ||
Archivo:Actualizando FW, TD-Online 2.png|alt= | Archivo:Actualizando FW, TD-Online 2.png|alt= | ||
</gallery> | </gallery> | ||
= '''<big>Connecting slave sensors (BLE and RS-485)</big>''' = | |||
TD-Online can function as a hub to which it is possible to connect up to '''8 slave sensors''' either via BLE or the RS-485 interface (in case of the wired sensors). | |||
== '''Pairing a BLE slave sensor''' == | |||
Go to the '''Additional settings''', once the TD-Online is connected to your smartphone via the app. Hit the '''"+"''' button. Then select '''Bluetooth''' (1), enter the sensor's name or its MAC address (2; both can be found on the sensor's head; the sensor's name is the model's letters TD, DU, TW, TH with a lower dash and the last 6 digits of the serial number f.e. TD_555666 or DU_222444) and tap on '''Connect'''. Or scan the slave sernsor's QR code (4).<gallery widths="250" heights="350"> | |||
File:Eng wiki tdo go to add settings.png|alt= | |||
File:Eng wiki tdo add settings start adding slave sensors.png|alt= | |||
File:Eng wiki tdo add settings adding slave sensors mac address or qr.png|alt= | |||
</gallery> | |||
== '''Connecting a wired slave sensor via the RS-485 interface''' == | |||
To connect a wired Escort-TD sensor as a slave device via the RS-485 interface, go to '''Additional settings''' menu, tap on the '''"+"''' button, then select the '''Wired''' option (1), enter the slave '''sensor's network address''' (2) and tap '''Connect'''. <gallery widths="250" heights="350"> | |||
File:Eng wiki tdo go to add settings.png|alt= | |||
File:Eng wiki tdo add settings start adding slave sensors.png|alt= | |||
File:Eng wiki tdo add settings adding slave sensor wired.png|alt= | |||
</gallery><blockquote>'''The salve's network address must be any number from 2 to 200. You can't use the network address 1 as it is already taken by the TD-Online itself.'''</blockquote>Before connecting the wired sensors to a TD-Online, be sure to connect them separately and change their network addresses via the PC configurator or the app. | |||
[[File:Eng wiki tdo add settings adding slave sensors wired slave sensor network address.png|863x863px]] | |||
If using a PC configurator, the network address can be modified via the '''General settings''' menu. | |||
[[File:Escort TD wired network address modification General settings.png|800x800px]] | |||
== '''Slave sensors' parameters in messages''' == | |||
ULx – level or angle reading of 'Slave Sensor x' | |||
VBx – battery voltage reading of 'Slave Sensor x' | |||
UTx – temperature reading of 'Slave Sensor x' | |||
VVx – FW version of 'Slave Sensor x' | |||
UCx – CNT reading of 'Slave Sensor x' | |||
WMx – operating mode of 'Slave Sensor x' | |||
LMx – luminosity reading of 'Slave Sensor x' | |||
UROx – roll reading of 'Slave Sensor x' | |||
UPTx – pitch reading of 'Slave Sensor x' | |||
UHx – humidity reading of 'Slave Sensor x' | |||
UPx – pressure reading of 'Slave Sensor x' | |||
UWx – weight reading of 'Slave Sensor x' | |||
DIx – DIN state reading of 'Slave Sensor x' | |||
ZULx – coefficient reading of TDQ-BLE paired with 'Slave Sensor x' | |||
ZUTx – temperature reading of TDQ-BLE paired with 'Slave Sensor x' | |||
ZUCSx – status of TDQ-BLE paired with 'Slave Sensor x' | |||
UZx – CNT reading of TDQ-BLE paired with 'Slave Sensor x' | |||
= '''<big>Enlaces destacados</big>''' = | = '''<big>Enlaces destacados</big>''' = | ||